To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.239420 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 113.239420 |
| Category | Power Tool |
| Language | English |
Read and understand the manual and labels.
Ensure the tool is properly grounded.
Wear safety goggles at all times.
Feed work against the cutter's rotation.
Explains DANGER, WARNING, and CAUTION terms.
Shaper must be securely bolted to a stand or floor.
Wear goggles, no loose clothing, use ear protection.
Ensure guards are in place & check setup before use.
Grounding requirements and warnings for electrical connection.
Proper wire size and condition for extension cords.
How to change and check motor rotation direction.
Identify and account for all included parts.
List of tools required for assembly.
Step-by-step guide for rod and table support.
Attaching motor pulley and mounting plate.
Mounting steel legs and switch assembly.
Mounting shaper to stand and plugging in motor.
Attaching shaper fence and cutter guard.
Identifies main parts and controls like switch and lever.
How to set motor direction and operate the switch.
Details on spindle, lock knob, keyed washer, spacers.
Information on fence adjustment, lock knobs, and cutter guard.
Procedures for starting pin and cutter removal.
How to set up and adjust the shaper fence.
Fine-tuning the fence faces for cutter clearance.
Positioning and use of spacers for vertical cutter positioning.
Techniques for shaping straight edges using the fence.
Using miter gauge and hold-down for end shaping.
Techniques for shaping irregular or curved edges.
Instructions for lubricating the spindle assembly.
Care and lubrication for the motor.
List of optional accessories for the shaper.
Addresses problems with spindle action and cutter security.
Fixes for ragged cuts, fence binding, and straightness.
Solutions for inconsistent cuts and feed problems.
Diagnosing and resolving motor power, speed, and overheating.
Comprehensive list and diagrams of all replacement parts.
Step-by-step guide for connecting the motor.
Instructions for ordering replacement parts.
Information on obtaining repair service.
