To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.213780 and is the answer not in the manual?
General| Model Number | 113.213780 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Max Cut Depth at 90° | 3 inches |
| Rip Capacity | 24 inches |
Follow safe operating practices, disconnect for servicing, and ensure proper maintenance.
Wear safety gear, secure workpieces, and keep area clear for safe operation.
Use safety gear, appropriate accessories, and follow all safety rules and warnings.
Identification of all included parts for verification.
Details on motor type, voltage, RPM, and warnings about incompatible motors.
Guidelines for safe electrical connection, grounding, and outlet requirements.
Placing and tensioning the V-belt between motor and spindle pulleys.
Procedure for cleaning and mounting the drill chuck onto the spindle.
Mounting the motor pulley onto the motor shaft, aligning keyways.
Attaching the motor to the drill press using bolts, washers, and nuts.
How to operate the drill switch, use the safety lock, and emergency shut-off.
Ensuring correct spindle speed, tool centering, and safe operating practices.
Diagnosing and resolving issues like noisy operation, drill burns, and wobble.
