To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.213843 and is the answer not in the manual?
General| Model Number | 113.213843 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| No-Load Speed | 5000 RPM |
| Table Size | 20 inches x 26 inches |
Wear safety goggles complying with ANSI Z87.1. Use face/dust mask and ear protection as needed.
Understand kickback causes, usually from non-recommended accessories.
Avoid being pulled into the tool; do not wear loose items; tie back hair.
Adhere to safety warnings and instructions posted on the drill press machine panel.
Instructions for connecting to a grounded outlet and using adapters safely.
Instructions for fitting the belt, aligning pulleys, and applying correct tension.
Wiring instructions for connecting the motor power cord safely.
Detailed steps for cleaning, oiling, and securely mounting the drill chuck onto the spindle.
Instructions for aligning the table perpendicular to the drill press column.
Instructions on using the locking feature to prevent unauthorized or hazardous use.
How to quickly stop the drill in emergency situations by hitting the switch.
Methods for drilling blind holes to a precise depth using stop nuts or the depth scale.
Instructions for inserting and securely centering drill bits into the chuck.
How to position the workpiece and use backup material to prevent splintering and injury.
Instructions for adjusting the table to desired bevel angles using the scale.
