Craftsman 137.216021 - Check for Damaged Parts

11.WEARPROPERAPPAREL.Do
notwearlooseclothing,gloves,
neckties,rings,braceletsorother
jewelrywhichmaygetcaughtin
movingparts.Nonslipfootwearis
recommended.Wearprotectivehair
coveringtocontainlonghair.
12.4_R _ ALWAYSWEAREYE
U
PROTECTION.Anypower
toolcouldthrowforeign
objectsintotheeyesand
causepermanenteyedamage.
ALWAYSwearSafetyGoggles(not
glasses)thatcomplywithANSI
SafetystandardZ87.1.Everyday
eyeglasseshaveonly impact-
resistantlenses.They ARE NOT
safety glasses.SafetyGogglesare
availableat Sears. NOTE:Glasses
orgoggles not incompliancewith
ANSIZ87.1couldcauseserious
injurywhentheybreak.
WEARA FACEMASK
OR DUSTMASK.Sawing
operationproducesdust.
14.0 SECURETHE
WORKPIECE.Use
clampsora visetohold
workpiecewhenpractical.
It issaferthanusingyourhandand
alsoitfreesbothhandstooperate
the tool.
15.DISCONNECTTOOLSFROM
POWERSOURCEbeforeservicing,
andwhenchangingaccessories
suchas blades,bitsandcutters.
16.REDUCE THE RISK OF
UNINTENTIONAL STARTING.
Make sure switch is in the OFF
positionbefore pluggingthe tool in.
17.USERECOMMENDED
ACCESSORIES.Consult
thisOperator'sManualfor
recommendedaccessories.The
useofimproperaccessoriesmay
causeriskofinjurytoyourselfor
others.
18.NEVER STAND ON THE TOOL.
Serious injury could occur if the
toolistipped or if the cuttingtool is
unintentionallycontacted.
19.CHECKFOR DAMAGEDPARTS.
Beforefurther useofthe tool,a
guardor otherpartthatisdamaged
shouldbecarefullycheckedto
determinethatitwilloperate
properlyandperformitsintended
function- checkfor alignmentof
movingparts,bindingofmoving
parts,breakageof parts,mounting
andanyotherconditionsthatmay
affectitsoperation.A guardorother
partthatisdamagedshouldbe
properlyrepairedor replaced.
20.NEVERLEAVETHE TOOL
RUNNINGUNATTENDED.TURN
THE POWER"OFF". Do not walk
awayfrom a runningtooluntilthe
bladecompletestopandthetoolis
unpluggedfromthe powersource.
6