f
AVAILABLE ACCESSORIES
• To avoid injury, do not attempt to modify this tool or
create accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious injury,
. Use only accessories recommended for this scroll
saw. Follow instructions that accompany accessories.
Use of improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories:
ITEM
Pin-end saw blades
Plain-end saw blades
UNPACKING AND CHECKING CONTENTS
• To avoid injury, if any part is missing or damaged, do
not plug the scroll saw in until the missing or
damaged part is replaced, and assembly is
complete.
• To avoid fire and toxic reaction, never use gasoline,
naphtha, acetone, lacquer, thinner, or similar highly
volatile solvents to clean the scroll saw.
Carefully unpack the scroll saw and all its parts, and
compare against the illustration following.
1. Remove the scroll saw from the carton by lifting the
saw by the back of the upper frame.
2. Place the saw on a secure surface and examine it
carefully.
CAUTION: Do not lift this saw by the arm that holds the
blade, this may result in damage to the tool.
Sears may recommend other accessories not listed in
this manual.
See your nearest Sears store or Power and Hand Tool
Catalog for other accessories.
Do not use any accessory unless you have completely
read the instruction or Operator's Manual for that
accessory.
Scroll Saw
Hex. Wrench
Blade
To Next Page
Loading...
Need help?
General
