Craftsman 21833 - Professional Contractor Table Saw User Manual

Warranty ......................................... 2
Safety Rules .................................... 2-5
Unpacking ....................................... 5
Assembly ...................................... 6-8
Installation ...................................... 8-9
Operation ..................................... 9-13
Maintenance .................................... 13
Repair Protection Agreement ....................... 14
Troubleshooting ............................... 16-17
Parts Illustration and List ........................ 18-29
Espafiol ...................................... 30-47
ONE-YEAR FULL WARRANTY ON CRAFTSMAN
TOOL
if this Craftsman toolfails due to a defect inmaterial or
workmanshipwithinoneyear from thedate ofpumhase,call
1-800-4-MY-HOME®TO ARRANGE FOR FREE REPAIR(or
replacementif repairprovesimpossible).
Thiswarrantydoes notcoverthe blade, whichisan
expendable part.
(fthistooliseverusedfor commercialor rentalpurposes,this
warrantywillapplyfor only90 daysfrom the dateofpurchase.
Thiswarrantygivesyou specific legalrightsand youmay also
have otherrightswhichvaryfrom state tostate.
Sears, Roebuck and Co., Hoffman Estates,IL 60179
WARNING: For your own safety, read allof the instructions
and precautions before operating tool.
PROPOSITION 65 WARNING: Some dust created by
power sanding, sawing, grinding, drilling and other construc-
tion activities contains chemicals known to the state of
California to cause cancer, birth defects or other reproductive
harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other
masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with
approved safety equipment. Always wear OSHNNIOSH
approved, properly fitting face mask or respirator when using
such tools.
CAUTION: Always follow proper operating procedures as
defined in this manual -- even if you are familiar with use of
this or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury'.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing, gloves,
neckties,rings, braceletsor otherjewelrywhichmay get
caughtinmovingpartsof machine.
© Sears, Roebuck and Co.
• Wear protective hair covering to contain long hair.
° Wear safety shoes with non-slip soles.
° Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lens-
es. They are NOT safety glasses.
° Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE WORK AREA FOR JOB
• Keep work area clean. Cluttered work areas invite acci-
dents.
• Do not use power toolsindangerous environments. Do not
use powertoolsindamp or wet locations.Do not expose
power toolsto rain.
• Work area should be properlylighted.
° Keepvisitorsat a safedistancefrom workarea.
• Keep childrenout of workplace.Makeworkshopchildproof.
Use padlocks,master switchesor removeswitchkeysto
prevent anyunintentionaluseof powertools.
• Keep power cordsfromcomingin contactwithsharp
objects,oil, greaseand hot surfaces.
TOOL SHOULD BE MAINTAINED
• Always unplugtoolpriorto inspection.
• Consult manual for specificmaintainingand adjusting pro-
cedures.
• Keep tool lubricated and clean for safest operation.
° Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
• Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
° Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condi-
tion that may affect a tool's operation.
• A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
• Maintain proper adjustment of rip fence and blade guard.
• Never adjust saw while running. Disconnect power to avoid
accidental start-up.
° Have damaged or worn power cords replaced immediately.
° Keep blade sharp for efficient and safest operation.
KNOW HOW TO USE TOOL
• Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
• Disconnect tool when changing blade.
• Avoid accidental start-up. Make sure that the tool is in the
"off" position before plugging in, turning on safety discon-
nect or activating breakers.
° Do not force tool. It will work most efficiently at the rate for
which it was designed.
• Keep hands away from blade and moving parts and cutting
surfaces.
° Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
• Do not overreach. Keep proper footing and balance.
° Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally contacted.
2

Craftsman 21833 - Professional Contractor Table Saw Specifications

General

Brand	Craftsman
Model	21833 - Professional Contractor Table Saw
Category	Saw
Language	English