=l
FULL ONE YE.AR WARRANTY ON CRAFTSMAN HEDGE TRIMMER
If this Craftsman Hedge Trimmer fails to perform properly due to a defect in material or workmanship
within one year from the date of purchase, Sears will repair it free of charge,
if this Craftsman Hedge Trimmer is used for commercial or rental purposes, this warranty coverage
applies for only 90 days from the date of purchase,
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS STORE OR SERVICE
CENTER IN THE UNITED STATES. This warranty applies only while product is in use in the United
States.
This warranty gwes you specific legal rights and you may also, have other rights which vary from
state to state.
SEARS, ROEBUCK AN[3 CO.
DEPT, 731A/671
SEARS TOWER
CHICAGO, IL 60684
INTRODUCTION
DOUBLE INSULATION -- is a concept in safety, in
electric power tools, which eliminates the need for
the usual three wire grounded power cord and
grounded supply system. Wherever there is electric
current in the tool there are two complete sets of in.
sulatlon to protect the user. AH exposed metal parts
are isolated from the internal metal motor com-
ponents with protecting Insulation.
IMPORTANT _ Servicing of a tool with double in.
sulation requires extreme care and knowledge of the
system and should be performed only by a qualified
service technician. For service we suggest you
return the tool to your nearest Sears Store for repair.
Always use original factory replacement parts when
servicing.
RULES FOR SAFE OPERATION
1, KNOW YOUR HEDGE TRIMMER -- READ AND FOLLOW ALL INSTRUCTIONS -- Read
owner's manual carefully. Learn its applications and limitations as well as the specific
potential hazards related to this tool.
2, DRESS PROPERLY -- Donotwearlooseclothingorjewelry. They can be caught tn mov-
ing parts. Use of sturdy gloves, non-skid footwear and safety goggles or safety glasses
with side shields is recommended.
3. STAY ALERT -- Watch what you are doing -- use common sense, Do not operate trim-
mer when fatigued,
. CUT HAZARD -- KEEP HANDS AWAY FROM BLADES -- Keep
both hands on handles when power is on, Do not attempt to remove cut material or hold
material to be cut When blades are moving, Make sure your trimmer is unplugged and
the switch is off when clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges of trimmer.
5. I_i]]_-- Blades will coast after trimmer is turned off.
,
To Next Page
Loading...
