24
Turn Power To The
SV100 On
Press the
Up Key
Keep Pressin
The Up Key Until
[FU1] Is Displayed
Press the
Up Key
Press the
Key
FUNC
Press
Up Key
Press
Up Key
Press the
Key
FUNC
Fig. 2.2.1: Programming Flowchart
Pressin
either the o
key will allow you
to view all functions within
the
User Level
•
You are now in the
User Level
•
[Function No. 1]
Speed 1 Frequency Is
Displayed
•
[Function No. 2 - Mac]
is displayed
•
Notice how you go through
the
User Level
functions in
the order shown In Table
2.2.1
•
[Function No. 16] is displayed.
FU1 is where you enter into and
view all of the
Service Level
functions.
Choose
• This takes you to
the
Service Level
•
[Function No. 17] is
displayed. FU2 is
where you can enter
into and view all the
Advanced Level
functions.
•
[Function No. 1 – Command
Frequency Selection] - You
Are Now In The First Function
Of The
Advanced Level
Pressing either or
keys will allow you to get to
each function of the
respective level you are in.
To get back to the
User
Level
, go to
[Function No.
26] in
Service Level
, or
[Function No. 53] in the
Advanced Level
and press
the key.
FUNC
•
[Function No. 1] F1
is the first function in
the
Service Level
•
[Function No. 2]
Acceleration time
•
[Function No. 3]
Deceleration time
•
This takes you to
the Advanced
Level
To Next Page
Loading...
Need help?
General