Page 10 of 101
REFRIGERATION SET POINT
Your Machine contains a Refrigeration Unit, you must also verify/set the
following:
1. Touch System Settings > The top menu is UI Theme.
2. Touch the down arrow to and touch Refrigeration Settings.
3. Touch Refrigeration Set Point, make necessary adjustments to
setting, touch Accept to lock in any changes or Cancel to exit
without making changes.
THE DRIVER MENU ACCESS
If PIN 1111 was entered and No Errors Exist, the Driver Main
Menu will appear. This Menu allows limited access to the
Service Modes. Touching an Icon or Menu Bar on the Screen
will provide access to that Menu.
Driver access allows you to:
1. Data Recall - View Sales Data.
2. View the Firmware Information.
3. Telemetry - Send a wireless DEX read.
4. Diagnostics Menu – View existing Errors.
5. Planogram - Manage or Audit the existing.
For access to all other Service Modes use PIN # 3333.
To Next Page
Loading...
