Page 15 of 101
Operators/Technician Main Menu
1. If PIN 3333 is entered and No Errors Exist, the
Operators / Technician Menu appears allowing
access to the Service Menu Bars.
2. Each of the Menu Bars provides access to detailed
Menus under the corresponding heading.
3. Touching a Menu Item on the Screen provides
access to that Menu Item.
4. Touch the arrow at the bottom or top of the Screens
to toggle between the Screens shown.
5. For Programming purposes the BevMAX Refresh 6
Media platform uses a 9” LCD Touch Screen and a
series of Icons and Menu Bars to access to the
Service Modes.
6. Touching a Menu Bar will take you to that Menu
followed by a list of related sub Menus.
7. A successful touch of an Icon or Menu Bar will sound
an audible beep to acknowledge acceptance of the
touch on the Screen before proceeding to the
selected Menu.
8. The lighter green arrow at the top or bottom of the
Screen indicates that additional Menus are available
to be seen or reviewed.
9. Across the top of the Main Menu is a series of three
Icons that will always be present when in the Service
Menu.
a) The Back Icon returns you to the prior Menu
Screen.
b) The Home Icon returns you to the Main
Service Menu.
c) The Test Icon is not currently used.
10. The content of the Main Menu area will change
depending what Menu you are in.
11. All the features normally associated with a Touch
Screen, its Icons and Menu Bars are possible,
including:
12. Touching an Icon or Menu Bar to toggle its current
state (On to Off, Yes to No, etc), or
13. Touching a Menu item to access another level of the
tiered Menu system.
14. Alpha & numeric keypads will pop up when required
for input.
15. Confirmation Pop Up Boxes will appear to confirm
an item to be added or deleted.
16. Another feature of this screen is that it shows the
current time, date, temperature and current Atlas
Board Software Revision at the bottom of the Screen
To Next Page
Loading...
