Page 7 of 101
Any Discounts or Surcharges will be shown
to the top right of the Shopping Cart as well
as the total of all Products in the Cart.
At any time you can press the Cancel Icon to
cancel the entire sale. If nothing happens for
30 seconds (settable) the Machine will
cancel the transaction and return to the Idle
Screen.
Any type of payment, Phone, Cards, Coin or
Bills may be inserted any time during the
transaction. Pressing Checkout will cause the
settlement Screen to appear if money has
not already been inserted.
The settlement Screen(s) will communicate
to the customer their Payment Options.
PROGRAMMING
GENERAL INFORMATION
In order to fully utilize the many features of your Vender it is important that you first understand the
options available and procedures for programming the Media Atlas H Board.
All programming, testing, and service functions are accomplished by using the Touch Screen in an easy to
follow, Display prompted format. Closing the Service Door or activating the Service Door Switch (on the
right side of Door Switch Bracket Assembly) will exit the function you are currently in and place the Vender
back in service.
NORMAL OPERATION MESSAGES
At initial power-up, the program will start and the Touch Screen will display Crane Merchandising Systems.
It will then show Initializing, and approximately 60 seconds later the Sales Messages and Cabinet
Temperature will appear. If you do not see a Cabinet Temperature or “--.-C” or “--.-F”, check the
Encapsulated Temperature Sensor. “Out of Service” is a communication issue with one or more of the
Peripheral Boards; X Motor Board, Y Motor Board, Cup Motor Board, Environmental Board and/or Port
Board.
To Next Page
Loading...
