Page 58 of 101
REFRIGERATION SYSTEM
Touch Refrigeration System Menu Bar to enter Menu to perform test.
The Display will show the current Temperature for several Temperature
Sensors. In a BevMax Machine only refer to the Evaporator Coil Sensor
reading. Refrigeration State is an unused field and does not represent
anything.
Touch Toggle Evaporator Fan or Toggle Compressor Menu Bar to toggle
Off/On to perform test.
Touch Toggle Evaporator Fan to toggle Current Status between Off and On.
Choosing Off will cause the fan to turn off or choose On will cause the fan to
turn on and run.
Touch Toggle Compressor to toggle Current Status between Off and On.
Choosing Off will cause the Compressor to turn off or choose On will cause the Compressor to turn on
NFC/MAGTEK HEAD TEST
Touch NFC/MagTek Head Test Menu Bar. (NFC = Near Field Communication)
Swipe or Tap a Card/Device to test. The Display will keep track of how many
good swipes or taps versus bad occur, 28 out of 30 good swipes or taps is
considered passing.
Note: A Credit Card does not normally have information on Track 3.
Note: When testing the NFC using a device or smart card Track 1 will show
the manufacture of the NFC installed device (UIC).
To Next Page
Loading...
