Page 98 of 101
Setting up Selections for the Event
In Price Adjust, if you touch Create Event, then Create Price Adjust Event,
leaving the By UPC toggle in the Off position will cause the Menu Bar below it
to say Selections and you can choose which Selection/s will be active for this
Timed Event.
Changing the By UPC toggle to the On position will cause the Menu Bar below
it to say by UPC/EAN Codes and you can choose which UPC Codes will be
active for this Timed Event.
Setting up Selections for the Event
If using Selection numbers for this Event touch the Selections Menu Bar.
Choose a Tray for Items you want to initiate the Event.
– For this example Tray #1.
To Next Page
Loading...
