To Next PageTo Next Page
Need help?Do you have a question about the Crane DEMING 4060 Series and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Category | Water Pump |
| Power Source | Electric |
| Series | 4060 |
| Model | 4060 Series |
| Voltage | 115/230V |
| Outlet Size | 1.25 inches |
| Material | Cast Iron |
Key safety precautions, warnings, and hazard symbols for pump operation and maintenance.
Guidelines for inspecting, storing, and locating service centers for pumps.
Procedures for preparing the foundation and mounting the pump and driver baseplate correctly.
Steps for checking and achieving proper angular and parallel alignment of pump and driver shafts.
Method for grouting the baseplate to ensure stability, prevent vibration, and secure foundation bolts.
Recommendations for suction and discharge piping, including size, support, and best practices for flow.
Instructions for electrical connections, voltage, and verifying correct pump rotation direction.
Methods for filling the pump and suction line with liquid to remove air before starting.
Procedures for safely starting the pump, including discharge valve operation.
Guidance on adjusting discharge valve and packing glands for optimal operation and lubrication.
Routine checks for bearing lubrication, leaks, wear, and proper maintenance of seals and couplings.
How to axially adjust the impeller to compensate for wear and maintain operating efficiency.
Procedures for maintaining packing box, including lubrication and proper gland tightening for seals.
Step-by-step instructions for taking the pump apart for service or repair.
Guidelines for reassembling pump components, ensuring proper alignment and sealing.
Common causes and solutions when the pump fails to deliver any liquid.
Diagnosing and fixing issues related to reduced liquid flow or delivery.
Identifying reasons for low discharge pressure from the pump.
Troubleshooting intermittent pump operation issues.
Causes for the pump drawing too much electrical power.
Identifying and addressing sources of vibration in the pump unit.
Diagnosing and resolving unusual noises from the pump or motor.
Detailed cross-sectional view and parts list for the 4060 Series pump.
Detailed cross-sectional view and parts list for the 4160 Series pump.
Terms and conditions of the manufacturer's limited warranty for pump products.
Information on how to register the product warranty and contact for claims.
Procedures and requirements for returning merchandise, including cleaning and authorization.
