Crane BARNES UT17 User Manual

A Crane Co. Company
BARNES
BARNES
®
Portable Utillity Submersible Pump
Model: UT17 - 1/6 Hp, 120 Volt, 60Hz, 1Ph
IMPORTANT! Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
420 Third Street 83 West Drive, Bramton
Piqua, Ohio 45356 Ontario, Canada L6T 2J6
Phone: (937) 778-8947 Phone: (905) 457-6223
Fax: (937) 773-7157 Fax: (905) 457-2650
www.cranepumps.com
Form No. 113829-Rev. F
SPECIFICATIONS
DISCHARGE ............................................... 3/4” G.H.T. Male, Vertical
LIQUID TEMPERATURE ............................. 77°F (25°C) Continuous
MOTOR HOUSING ...................................... Thermoplastic
PUMP STRAINER ........................................ Thermoplastic
IMPELLER .................................................. 2 Vane Semi Open, Thermoplastic
SHAFT ........................................................ Steel
O-RINGS ...................................................... Buna-N
HARDWARE ............................................... Stainless Steel
CABLE ENTRY ............................................ 15 Ft. (4.5M) Cord with Plug and Pressure
Grommet for Sealing and Strain Relief
CABLE TYPE ...............................................18/3 SJTW
SEAL ............................................................ Single Mechanical
Material ............................... Carbon/Ceramic/Buna-N
Hardware - 300 Series Stainless
UPPER BEARING ........................................ Single Row, Ball, Sealed
LOWER BEARING ....................................... Single Row, Ball, Sealed
MOTOR ........................................................ Air-Filled. With Class B Insulation
SINGLE PHASE ...........................................Permanent Split Capacitor (PSC).
Includes Thermal Overload Protection in Motor
DIMENSIONS
PERFORMANCE
Manual Index

Crane BARNES UT17 Specifications

General

Model	UT17
Category	Water Pump
Stages	1
Power Source	Electric
Voltage	115V
Capacity	17 GPM
Head	23 feet
Max Flow Rate	17 GPM

Summary

Safety First and General Information

General Safety Symbols and Warnings

Explains hazard symbols and lists specific risks like hazardous fluids, biohazards, and rotating machinery.

Electrical Safety Precautions

Highlights critical safety measures for electrical connections, grounding, and disconnecting power.

Operational Safety Guidelines

Provides guidance on safe operation, handling, discharge, and avoiding entanglement or overheating.

Usage Restrictions and Material Warnings

Details limitations on use, requirements for returned goods, and potential lead content in materials.

Receiving and Storage Guidelines

Instructions for inspecting the pump upon arrival and guidelines for short and long-term storage.

Installation Procedures

Covers pump location, submergence depth, and discharge hose recommendations for proper installation.

Pump Operation and Maintenance

Airlock Prevention and Resolution

Guidance on identifying, preventing, and resolving airlocks to avoid pump overheating.

Electrical Connection Safety

Emphasizes not modifying the power cable and avoiding immersion or handling while plugged in.

Overload Protection and Reset

Explains the automatic thermal overload protection and the procedure for resetting the pump.

Service and Repair

Instructions for cleaning the strainer and examining the impeller for wear or damage.

Warranty Information and Registration

Details required information for warranty claims and the process for warranty registration.

Warranty Terms and Conditions

Limited 24 Month Warranty Overview

Defines the warranty period and conditions for material and workmanship defects.

Warranty Limitations and Exclusions

Lists factors that void the warranty, such as improper installation, voltage, or modifications.

Remedy for Warranty Breach

Specifies that the sole remedy is repair or replacement at the manufacturer's election.

Exclusions from Liability

Disclaims responsibility for consequential damages, including labor costs or lost profits.

Important Product Information

Warranty Registration Process

Provides instructions and a URL for completing the warranty registration form.

Returned Goods Policy

Details the requirement for a 'Returned Goods Authorization' before shipping items back.

Product Return Safety Requirements

Mandates cleaning, sanitizing, or decontaminating products before shipment.