To Next PageTo Next Page
Need help?Do you have a question about the Crane Barnes SP50X and is the answer not in the manual?
General| Horsepower | 0.5 HP |
|---|---|
| Maximum Flow Rate | 50 GPM |
| Maximum Head | 45 feet |
| Voltage | 115/230V |
| Phase | Single Phase |
| Motor Power | 0.5 HP |
| Power Source | Electric |
| Inlet/Outlet | 2" NPT |
Explains hazard identification symbols and general safety precautions.
Covers grounding, power disconnection, and safe wiring practices.
Details safe practices during operation, handling, and installation.
Addresses risks from hazardous fluids, biohazards, and material handling.
Lists technical details including discharge, materials, motor, electrical, and level controls.
Guidelines for new owners on receiving, storage, and initial handling.
Provides contact details for locating authorized service centers.
Specifies ideal location, sump dimensions, submergence, and discharge setup.
Details the minimum liquid level required for proper pump operation.
Covers discharge piping, check valve usage, and preventing backflow.
Details typical installation of liquid level controls and general comments.
Instructions for removing the bottom plate and servicing the impeller.
Lists suppliers and grades of dielectric cooling oil for the motor.
Details on power cable requirements, grounding, and avoiding extension cords.
Explains automatic thermal overload protection and its operation.
Lists essential details like part number, model, and date code for warranty service.
Illustrates pump performance (flow vs. head) at 60 Hz.
Addresses issues like no power, restricted float, or defective switch/motor.
Covers insufficient capacity, frequent cycling, and noisy operation.
Diagnoses causes for thermal overload trips and excessive vibration.
Outlines the warranty period, coverage, and limitations for product defects.
Details conditions that void the warranty and clarifies liability for damages.
Instructions and URL for registering the product warranty online.
Procedures for returning merchandise, including authorization and cleaning requirements.
