EasyManua.ls Logo

Crane BARNES SITHE 4SCD Series User Manual

Crane BARNES SITHE 4SCD Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A Crane Co. Company
IMPORTANT! Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
changeproductwithoutpriorwrittennotication.
420 Third Street 83 West Drive, Bramton
Piqua, Ohio 45356 Ontario, Canada L6T 2J6
Phone: (937) 778-8947 Phone: (905) 457-6223
Fax: (937) 773-7157 Fax: (905) 457-2650
www.cranepumps.com
Form No. 130642S-Rev. K
28 Frame
4SCM
Monovane Pumps
20 - 100HP, 1750RPM
20 - 30HP, 1150RPM
4SCD
Dual Vane Pumps
20 - 60HP, 1750RPM
20 - 40HP, 1150RPM
6SCM
Monovane Pumps
20 - 60HP, 1750RPM
20 - 25HP, 1150RPM
6SCD
Dual Vane Pumps
20 - 125HP, 1750RPM
20 - 40HP, 1150RPM
8SCD
Dual Vane Pumps
25 - 60HP, 1750RPM
20 - 40HP, 1150RPM
10 - 15HP, 870RPM
8SCT
Tri-Vane Pumps
20 - 60HP, 1750RPM
20 - 40HP, 1150RPM
10 - 30HP, 870RPM
10SCD
Dual Vane Pumps
25 - 40HP, 1150RPM
10 - 30HP, 870RPM
INSTALLATION and OPERATION MANUAL
Submersible Chopper Pump
This product may be covered by one or more of the following
patents and other patent(s) pending: NZ DSN NO. 424412,
NZ DSN NO. 424413, AUS DSN NO. 201812608,
AUS DSN NO. 201812609, EU Design Reg. 005293040-0001
Question and Answer IconNeed help?

Do you have a question about the Crane BARNES SITHE 4SCD Series and is the answer not in the manual?

Crane BARNES SITHE 4SCD Series Specifications

General IconGeneral
BrandCrane
ModelBARNES SITHE 4SCD Series
CategoryWater Pump
LanguageEnglish

Summary

SAFETY FIRST!

General Safety Precautions

Comprehensive warnings and cautions for safe pump operation, installation, and handling.

INSTALLATION GUIDELINES

Location, Submergence, and Discharge

Guidance on pump placement, submergence levels, and discharge piping setup.

Liquid Level and Electrical Connections

Details on liquid level controls and making electrical connections for the pump.

ELECTRICAL DATA AND WIRING

START-UP OPERATION

Pre-Start Checks and Tests

Procedures for checking voltage, phase, rotation, sensors, insulation, and pump-down.

SERVICE AND REPAIR PROCEDURES

TROUBLESHOOTING GUIDE

Related product manuals