Crane EE-5202 - TECHNICAL SPECIFICATIONS & PREPARATION; Product Specifications; Pre-Operation Checks and Placement

7
TECHNICAL SPECIFICATIONS
Rating Voltage
120V
Frequency
60Hz
Power
280W
Water Tank Capacity
Approx. half Gallon
Run Time Per Tank
Up to 13 Hours
BEFORE EACH USE:
CHECK HUMIDIFIER PLACEMENT:
Place the Humidifier on an elevated, non-metallic, lint-free, waterproof, level
surface at least 2 feet above the floor.
• DO NOT PLACE ON CARPET OR TOWEL. The fan
vent is located on the bottom of the humidifier base.
The fan vent MUST NOT be obstructed.
• DO NOT PLACE ON WOOD SURFACE or near
furniture that can be damaged by too much moisture.
CAUTION
• DO NOT attempt to operate the humidifier without water in the Water Tank.
• DO NOT plug or unplug the Power Cord with wet hands as electric shock could
occur.
CHECK WATER LEVEL SENSOR:
Make sure the Water Level Sensor is secured properly and not
obstructed.
(Page 6 – List of Main Parts)