Crane S002391 - Quick Mode and Recovery Test; Console Button Functions (UP;DOWN;MODE)

service@actionspares.com.au
MODEL: S002391 PRODUCT CODE: 14498 06/2020
AFTER SALES SUPPORT
1800 465 070
25
How To Use The Console Display (cont)
4. Quick mode
If there is RPM signal input in any mode,the console will QUICK START immediately.
If there is no RPM signal input more than 5 seconds, the system will STOP automatically.The value of
STROKES,TIME, DIST, CAL and PULSE remain unchanged.
5. Recovery Key
If there is a PULSE signal input and appear heart rate value in any mode, press RECOVERY KEY.
1. After the console displayed PULSE value, press this key,all display functions will stop display
immediately ,except TIME and PULSE.
2. TIME display “1:00” and begin to count down( If there is no PULSE input in count down period, it
doesn’t affect the automatic time to power off) When it counts down to zero, LCD will only display
“FX”(X value is 1~6) in the windows,if user press any key, it will skip to the normal display system.
STOP. TIME,DISTANCE,CALORIES,PULSE,TOTAL STROKES and STROKES will display the current
training value.
3. After“FX”was displayed, press each key to recover to the general display. If user press the
RECOVERY key again, it will carry out again.
4. In RECOVERY period, press this key can recover.
Button Function
1. UP KEY
• STROKES setting range: 0~9990 (press UP/DOWN to adjust, each increment is 1. Press RESET, all
value will return to zero.)
• TIME setting range: 0:00~99:00 (press UP/DOWN to adjust,each increment is 1:00.Press RESET, all
value will return to zero.)
• DIST setting range: 0~99.50 (press UP/DOWN to adjust, each increment is 0.5. Press RESET, all value
will return to zero.)
• CAL setting range: 0~9990 ( press UP/DOWN to adjust, each increment is 10. Press RESET, all value
will return to zero.)
• PULSE setting range:30~240 ( the preset value is 30 press UP/DOWN to adjust, each increment is 1.
Press RESET, all value will return to zero.)
• In standby mode, press MODE+UP for 3 seconds which can pow off quickly.
2. DOWN KEY
• STROKES setting range: 0~9990 (press UP/DOWN to adjust, each decrease value is 1. Press RESET, all
value will return to zero.)
• TIME setting range: 0:00~99:00( press UP/DOWN to adjust, each decrease value is 1:00. Press
RESET, all value will return to zero.)