Creality CR-Scan 01 User Manual

First start up
Turntable mode
1.Preview adjust Perspective
a. Click the Preview button to start the preview
b. Adjust the distance from the scanner to the turntable to between 600-800mm
c. Rotate the scanner so that the center of the camera image covers the turntable
and is aligned with the scanned object
d. Adjust the brightness to make the photo brightness appropriate
a. Click button，Select the Calib.txt file on the device's USB drive in Calib file
b. Check if the SN number on the bottom of the device and the imported SN number match
c. Click button,Complete the Calib file import and the software restarts automatically
im port

Creality CR-Scan 01 Specifications

General

Scan Accuracy	0.1 mm
Scan Speed	10 fps
Light Source	White light
Output Formats	OBJ, STL
Connectivity	USB
Technology	Structured Light
Resolution	0.5 mm
Operating System Compatibility	Windows
Scanning Area	200 x 200 mm
Working Distance	400mm - 900mm
Compatibility	Windows
Power Supply	DC 12V
Alignment	Feature/Marker/Manual