42
ERROR:13
Description: The CPU temperature of the laser module is too high.
Solution:
• Power off the machine and wait for the laser module to cool down to a safe
temperature.
• Clean the laser module and ensure it is properly cooled before resuming work.
ERROR:14
Description: The temperature of the host CPU is too high.
Solution:
• Check if the ambient temperature is too high. If so, allow the host CPU to cool down
to a suitable temperature before restarting the device.
ERROR:24
Description: The machine is in an unsealed state.
Solution:
• Close the protective cover and drawer completely.
• Press the Start button once the machine is properly sealed, and then continue
working.
ERROR:25
Description: The air pump is abnormal.
Solution:
• Contact the after-sales service for technical assistance to resolve the issue.
To Next Page
Loading...
