6
6. If the device is not used for an extended period, turn it off and disconnect the power
cord.
7. Do not touch the electronic areas or components with your hands or tools when the
device is connected to power. It is strictly forbidden to plug and unplug the laser
module cable while the device is powered on.
8. When the device is running, do not touch any moving parts or the laser module.
9. Always wear protective goggles and do not look directly at the laser while it is in
operation.
10. Laser engraving and cutting can produce smoke or odors. Operate the device in a
well-ventilated environment.
11. Children should only use the device under adult supervision.
12. Keep a fire extinguisher nearby and regularly check and maintain it.
13. Never leave the device unattended while it is operating.
14. Users should follow the laws and regulations of their country or region regarding the
use of this equipment. Improper or illegal use of this device may result in legal
consequences, for which we will not be responsible.
15. Regularly clean the tray to prevent debris accumulation.
Important Notice:
• Using controls, adjustments, or performing procedures other than those specified
may result in hazardous radiation exposure.
• The laser safety classification of this product follows IEC 60825-1:2014. The laser
radiation level emitted through the laser aperture exceeds level 1.
To Next Page
Loading...
