CreatBot D600 - Status Page Details

210℃
200.0℃
Status Page
45℃
40.0℃
Touch and set up the temp of the nozzle.
Preset nozzle temperature
Current nozzle temperature
45℃
40.0℃
Touch and set up the temp of the nozzle.
Preset nozzle temperature
210℃
200.0℃
Touch and set up the temp of the
45℃
40℃
Touch and set up the temp of the nozzle.
210℃
210℃
- 12 -
Printer Operation
210℃
200.0℃
45℃
40.0℃
Touch and set up the temp of the
45℃
40.0℃
Touch and set up the temp of the hotbed.
Current platform temperature
Preset platform temperature
210℃
200.0℃
Touch and set up the temp of the hot wind.
Preset hot air temperature
Current hot air temperature
45℃
40℃
Touch and set up the temp of the
210℃
200℃
Current nozzle temperature
- 13 -
Current printing progress
60.00% 00:00 Z:0.00
Detail page
Printer Operation
Change
Pause
Stop