Creative Digital MP3 Player 2 - Special Modes; Repeat Mode Settings; Hold Mode Function; Equalizer Adjustments

15
Repeat mode
To use Repeat mode, do the following:
1. Slide the
Repeat
switch to the left or right.
2. To playback the tracks in random order, with your player’s front panel facing
you, slide the
Repeat
switch to the right.
3. To repeat a selected track, with your player’s front panel facing you, slide the
Repeat
switch to the middle.
4. To repeat all the tracks, slide the
Repeat
switch to the left.
Hold mode
To use Hold mode, do the following:
1. Slide the
Hold
switch downwards. A icon appears. This indicates that your
player is in Hold mode and will not respond when its keys are pressed.
2. To disable the Hold mode, slide the
Hold
switch upwards.
Equalizer mode
To use Equalizer mode:
1. Slide the
Equalizer
switch to the left or right to boost the bass or treble levels.
2. To set your player to treble, with your player’s front panel facing you, slide the
Equalizer
switch to the right. In this mode, your player boosts high frequency
signals.
3. To set your player to bass, with your player’s front panel facing you, slide the
Equalizer
switch to the left. In this mode, your player boosts low frequency
signals.
DigMP3.book Page 15 Friday, April 12, 2002 3:26 PM