Creative Sound Blaster X-Fi - Page 41


Jack,
Connectoror
Cable
Description
1. RearLeftjack
ConnectthisjacktotheLineOut2jackonyourSoundBlasterX-Fiaudiocard,usinga3.50
mm(1/8-inch)4-pole-to-RCAcable(availableseparately).
2. RearRightjack
ConnectthisjacktotheLineOut2jackonyourSoundBlasterX-Fiaudiocard,usinga3.50
mm(1/8-inch)4-pole-to-RCAcable(availableseparately).
3. SideRightjack
ConnectthisjacktotheLineOut2jackonyourSoundBlasterX-Fiaudiocard,usinga3.50
mm(1/8-inch)4-pole-to-RCAcable(availableseparately).
4. LineOut2jack
Connectthefollowingjacksonamultichannelhometheaterreceivertothisjackusinga3.50
mm(1/8-inch)4-pole-to-RCAcable(availableseparately):
On4.1and5.1systems:RearLeftandRearRight
On7.1systems:RearLeft,RearRightandSideRight
5.
3.50mm(1/8-inch)surround-to-RCAcable(availableseparately)
ConnectstheSoundBlasterX-Fiaudiocardandhometheaterreceiver.