10
CONTROL PANEL FUNCTIONS
Figure Four
Figure Five
HEAT SELECTOR BUTTON
Select ‘High Dry’ for items
that are particularly bulky
or large quantities.
Select ‘Low Dry’ for delicate
items such as silk, nylon & linen.
START BUTTON
After having set up the Heat
Selector and Timer Dial, press
the Start button. The dryer
will start and work until the
program is finished. If the during
this process the door is opened
or power is switched off, the
dryer will stop working. In order
to start the dryer again after
the door Is closed or power Is
switched back on, you will need
to push the Start button, then
the dryer will start working
again.
NOTE: This Start button is only
designed to start the dryer
working. If you press this button
during the drying process, the
dryer will not pause. In order to
stop the dryer, you must turn the
timer dial to the Off position.
Low High
To Next Page
Loading...
