7
SAFETY INFORMATION
ELECTRICAL SAFETY:
PLUG & CORD
WARNING: Cut off all supply
circuit connections before
accessing the terminals.
DO NOT run the cord under
floor coverings. Instead,
arrange the cord away from
traffic areas where it will not
become a trip hazard.
To disconnect the appliance,
turn the appliance off, switch
off the power outlet and
remove the plug from the
power outlet.
Plug the appliance into a
grounded socket protected
by a fuse conforming to
the values specified in the
technical specifications chart.
The appliance circuit breaker
switches should be in a place
accessible to the end user
when the appliance is in
place.
DO NOT touch the plug with
wet hands and always unplug
by holding the plug and not
pulling the cord.
DO NOT excessively bend,
stretch, twist or bind the power
cord or place heavy objects on it.
DO NOT us an extension cord
with this product. Only use the
original cord supplied, If the cord
is cut or damaged in any way do
not use.
Make sure that there is no liquid
or humidity in the outlet where
the plug is inserted.
Unplug the appliance during
installation, maintenance,
cleaning and repair.
Ensure the plug is fully inserted
in the socket to avoid sparks.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
CAUTION: If this appliance is
supplied from a cord extension
set or an electrical portable
outlet device, the cord extension
set or electrical portable outlet
device must be positioned so
that it is not subject to splashing
or ingress of moisture.
To Next Page
Loading...
