9
CONTROL PANEL FUNCTIONS
DRYING PROGRAM
SELECTOR
There are five drying
combinations available:
Cool, Anti-wrinkle, Warm,
Hot and Air dry.
A. Air Dry: This function runs
with cool air, primarily to air
items that have been stored
for a long period of time.
B. Off: When the ‘Drying Timer’
dial is in the ‘OFF’ position no
power is supplied to the unit.
As soon as the dial is turned
clockwise to the desired
program, the dryer will start.
C. Cool: This function is generally
used to cool the items that
have just been dried. This
helps to prevent creasing.
Figure Three
D. Anti-wrinkle: This is used
for items that are difficult
to iron i.e.: cotton shirts and
linen. Using the heat selector
knob, choose ‘Low’. Set the
drying timer knob between
30-60 minutes depending on
the amount of items in the
dryer. Once the timer stops
(including the cool program)
the items will still contain
moisture, making the ironing
process easier.
E. Warm: This function will dry
and cool items and in most
cases leave items wrinkle free
(depending on material).
Select the ‘High’ heat option
and set the timer for more
that 60-120 minutes.
E. Hot: For drying large
quantities or bulky items
(More than 0.5 times the rated
capacity). Select the ‘High’
heat option and set the timer
for more that 120 minutes.
G. Off: When the ‘Drying Timer’
dial is in the ‘OFF’ position no
power is supplied to the unit.
As soon as the dial is turned
clockwise to the desired
program, the dryer will start.
To Next Page
Loading...
