11
Figure Six
Figure Seven
Figure Eight
INSTALLATION
NOTE: This dryer can not be used
upside down.
Place the dryer in a dry well
ventilated area. It should be
positioned away from heat and
direct sunlight.
If the dryer is not wall mounted,
it must be placed on firm
horizontal ground. Do not place
the dryer on carpet as this will
block the intake. There should be
at least 15cm between the dryer
and the walls.
The dryer comes with fixed legs
that need to be assembled to
ensure stability.
If the dryer is rack mounted.
A secure bracket is required to
ensure stability and prevent
vibration. At least 15cm between
the dryer and walls is required
(The bracket is not included).
Leg
15cm
Bracket
To Next Page
Loading...
