Description: Vibration setting
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with VIBRATION. Press MODE
Button once.
One of the VIBRATION options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Options: ON / OFF
Note: If you turn the VIBRATION off,
there won’t be any sounds even if other
presets are turned on.
Description: Clear the residual nitrogen
calculation from the device (Tissue
Clear).
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with TISSUE CLEAR. Press MODE
Button once.
One of the TISSUE CLEAR options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Options: ON / OFF
WARNING:
1. Please make sure you fully
understand that changing this setting
will affect algorithm calculations and
the related risks. DO NOT USE this
function if you are not a certified
diving instructor or you are not
suggested to do so by a certified
diving instructor or facility.
2. If you are an instructor and need to
rent this dive computer to different
students or customers, please make
sure they DO NOT have diving
activities within the pass 72 hours for
maximum safety control.