Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 24
Configuration
The AutoTracker uses a unique combination of motion and facial detection along with sophisticated
algorithms to track a presenter much like a human camera operator would. Its unique two-camera
design with a fixed wide-angle camera working in tandem with a moving PTZ camera guarantees that
the AutoTracker will track any subject reliably across the presentation area.
The sophisticated dual-processor design of AutoTracker allows tracking without any additional
hardware. A one-time configuration is required to tailor the tracking parameters to your environment.
Once configured, the camera will work autonomously and the software will not be required for
operation.
This section provides the following information:
•Configuration via the 1 Beyond Camera Manager
•VISCA Commands
To Next Page
Loading...
Need help?
General
