Crestron 1 Beyond AutoTracker 3 Series - Camera Configuration Process

25 • IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-
SLVR-1B
Product Manual — Doc.
9323C
Configuration via the 1 Beyond Camera
Manager
The 1BeyondCameraManager software is the central hub for configuring, monitoring, and controlling
1Beyond IP cameras. It allows monitoring of up to four video streams simultaneously and lets you
configure the latest 1Beyond cameras.
Add to Camera List
Once 1BeyondCameraManager software is installed on the host computer and the camera is
connected to the network or directly via Ethernet, launch the software to start configuring the camera.
Use the Device Management tab of the software to add the camera to the Camera List.