Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 62
Command Set Command Command Packet Comments
CAM_ExpComp On 8x 01 04 3E 02 FF Exposure Compensation On/Off
Off 8x 01 04 3E 03 FF
Reset 8x 01 04 0E 00 FF Exposure Compensation Amount
Setting
Up 8x 01 04 0E 02 FF
Down 8x 01 04 0E 03 FF
Direct 8x 01 04 4E 00 00 0p 0q FF p,q: ExpComp Position
CAM_Backlight On 8x 01 04 33 02 FF Back Light Compensation
ON/OFF
Off 8x 01 04 33 03 FF
CAM_Aperture Reset 8x 01 04 02 00 FF Aperture Control
Up 8x 01 04 02 02 FF
Down 8x 01 04 02 03 FF
Direct 8x 01 04 42 00 00 0p 0q FF p,q: Aperture Gain
CAM_
PictureEffect
Off 8x 01 04 63 00 FF Picture Effect Setting
Neg.Art 8x 01 04 63 02 FF
B&W 8x 01 04 63 04 FF
CAM_Memory Reset 8x 01 04 3F 00 pp FF pp: Memory Number (=0 to 255)
Corresponds to 0 to 255 on the
Remote.
Set 8x 01 04 3F 01 pp FF
Recall 8x 01 04 3F 02 pp FF
SYS_Menu Off 8x 01 06 06 03 FF Turns off the menu screen.
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF p,q,r,s: Camera ID (=0000 to
FFFF)
IR_Receive On 8x 01 06 08 02 FF IR receiver On/Off
Off 8x 01 06 08 03 FF
Information
Display
On 8x 01 7E 01 18 02 FF Operation status display On/Off
Off 8x 01 7E 01 18 03 FF
To Next Page
Loading...
Need help?
General
