Configuration Guide — 8341B DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 • 37
Configurethe Ring Group
Toconfiguretheringgroup:
1. ClickUsers andDevices >GroupProgramming> RingGroups.
2. ClickAdd(notshown).
3. Enter1 for Enterthenumber of records tochange.
4. IntheDefinetheAddRangeProgrammingPattern section,dothefollowing(for this
example):
a. Enter 5010for theRingGroup.
b. SelectRingAllfor theRingGroupMode.
c. Enter10for theClass of Service- Day,Class of Service- Night1,andClass of
Service- Night2.
d. Enter 1 for theZoneID.
e. Leaveallother fieldsatthedefaultvalues.
5. ClickSave.
Mitel: AddMembers toRingGroup
6. ClickAddMember.
7. Enter 1 for number of records toadd.
8. IntheRingGroupMembers section,dothefollowing:
a. Enter 5000for theNumber.
b. Enter Presentfor Presence.