Need help?Do you have a question about the Crestron Avia DSP Series and is the answer not in the manual?
General| Model | Avia DSP Series |
|---|---|
| Series | Avia |
| Bit Depth | 24-bit |
| Sample Rate | 48 kHz |
| Network Connectivity | Ethernet |
| Type | Digital Signal Processor |
| Audio Channels | Varies by model |
| Input Channels | Varies by model |
| Output Channels | Varies by model |
| Processing Power | Varies by model |
| Control Interface | Ethernet |
| Control | Crestron control systems |
| Control Protocols | Cresnet |
| Power Supply | Varies by model |
| Mounting Options | Rack-mountable |
| Compatibility | Crestron control systems |
Defines the intended audience for this configuration guide.
Illustrates the network topology for integrating Crestron Avia DSP with Avaya Aura.
Lists the specific software versions required for the integration.
Details the necessary hardware components for setting up the lab network.
Provides details about Crestron Avia DSP products and their functionalities.
Outlines the document's content, supported features, and configuration scope.
Lists features that are not supported in this secure SIP integration.
Highlights known problems and restrictions encountered during integration.
Describes the physical connections required for the Crestron Avia DSP device.
Explains how to discover and access DSP devices on the network.
Details how to configure the DSP's network interface for SIP communication.
Guides on adding static routes for proper SIP call routing.
General steps for configuring the Crestron Avia DSP device settings.
Step-by-step guide to configure analog audio inputs on the DSP.
Step-by-step guide to configure analog audio outputs on the DSP.
Instructions for setting up SIP registration parameters on the DSP.
Process for downloading and preparing the root certificate for TLS handshake.
Steps to import and assign the root certificate using the console utility.
Configuring IP addresses for Avaya Session Manager and Communication Manager.
Configuring dial patterns for call routing and feature access.
Configuring network region, domain, and codec set parameters for SIP phones.
Defining the list of codecs for calls between the PBX and PSTN.
Configuring signaling groups for SIP phone registration and PSTN calling.
Detailed configuration steps for Signaling Group 3.
Detailed configuration steps for Signaling Group 10 for PSTN calls.
Steps to configure Trunk Group 3 for connecting to Avaya Session Manager.
Steps to configure Trunk Group 10 for PRI/PSTN calls.
Configuring route pattern 3 for routing calls to SIP phones.
Configuring route pattern 10 for routing calls to the PSTN.
Configuring AAR analysis for call routing based on dialed digits.
Configuring ARS analysis for PSTN call routing.
Steps to create a SIP domain for call routing within Session Manager.
Defining logical and physical locations for SIP entities.
Adding SIP entities for Avaya Communication Manager.
Configuring SIP entity details for Avaya Session Manager.
Creating an entity link between Session Manager and Communication Manager.
Initial steps for creating user profiles in Avaya Aura Session Manager.
Configuration of communication profiles and addresses for user accounts.
Finalizing user configuration, including extension and endpoint settings.
To Next Page
