Crestron Avia DSP Series - Crestron Avia DSP Configuration; Connections; Device Discovery;Access; Set Up SIP Interface

Configuration Guide — 8340B DSP-1282 &DSP-1283: Secure SIP Endpoint with Avaya Aura 7.1• 5
CrestronAvia DSP Configuration
This sectionprovidesthefollowingdetails:
l Howtosetupconnections totheamplifier andspeaker
l Howtoaccess theDSP onthenetwork(oncepowered)
l HowtoconfiguretheDSP for registrationandintegrationwiththePBX
Connections
Makethefollowingconnections:
l ConnectmicrophonetoDSP MIC/LINEINPUTSport1
l ConnectDSP LINEOUTPUTSport1 to"AudioIn"onamplifier
l Connect"AudioOut" of amplifiertospeaker
l ConnectLAN porttonetwork
DeviceDiscovery/Access
UsetheCrestronToolboxandtheCrestronAviatooltodiscover andaccess theconnected
LAN and/or VOIPports)DSP devices.
UsetheHelpmenutoassistwhenperformingthediscovery andconfigurationprocedure.
Set Up SIP Interface
TheDSPunitshaveseparatenetworkinterfaces for Voiceover InternetProtocol(VoIP)
andLANontherear panel.Configureeither onefor SIPcalling.Thedefaultconfiguration
bindsSIP callingtotheLAN interface.Anoptionalconsolecommandbinds theSIP
interfacetotheVoIPconnector.ConfigureallVoIPconnections onaseparateVirtualLocal
AreaNetwork (VLAN)or subnet.VoIP connections cannotbeonthesamesubnetas the
LAN connection.
Ethernet
UsetheEthernetcommandtoturntheVoIPporton/off.
DSP-1281>Ethernet ?
ETHERNET [<device_num> ON | OFF [/now]]
Device_num - 0 nn
ON - enables VoI
OFF - disables VoIP
/now - take effect without a reboot
No parameter - displays the current setting