Crestron C2N-RTHS User Manual

Remote Temperature/Humidity Sensor Crestron C2N-RTHS
Setting the Net ID in Device Settings
Double-click the C2N-RTHS icon to open the “Device Settings” window.
This window displays the C2N-RTHS device information. If necessary,
select the Net ID tab to change the C2N-RTHS Net ID, as shown in the
following figure.
C2N-RTHS “Device Settings” Window
NOTE: SIMPL Windows automatically changes Net ID values of a
device added to a program if a duplicate device or a device with the same
default Net ID already exists in the program. Always ensure that the
hardware and software settings of the Net ID match. For Net ID hardware
setting details, refer to “Identity Code” on page 7.
C2N-RTHS Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron
control system by assigning signals to symbols.
C2N-RTHS Symbol in SIMPL Windows Detail View
14 • Remote Temperature/Humidity Sensors Operations & Installation Guide – DOC. 6232A

Crestron C2N-RTHS Specifications

General

Brand	Crestron
Model	C2N-RTHS
Category	Temperature Controller
Language	English