Crestron Cresnet Network - DIN Rail Cresnet Distribution Block

8 • Cresnet® Network Design Guide — Doc. 9292A
DINRail Cresnet Distribution Block
The DIN-BLOCK is a DIN rail-mounted Cresnet distribution block designed to facilitate the
termination of Cresnet wiring at a head end or distribution point. DIN rail mounting enables
modular installation alongside Crestron DIN Rail lighting and automation control modules and
other third-party DIN rail mountable devices.
DIN-BLOCK DINRail Cresnet Distribution Block
l
Diagnostic LEDs indicate the presence of network power and data.
l
Twelve 4-pin detachable green (3.5mm)terminal blocks are provided, grouped in two sets
of six.
l
Provides a split power bus for flexible 24V power distribution.