Need help?Do you have a question about the Crestron DigitalMedia DM-MD6X4 and is the answer not in the manual?
General| Type | Digital Media Switcher |
|---|---|
| Input Ports | 6 |
| Output Ports | 4 |
| DM 8G+ | Yes |
| HDCP | 2.2 |
| Power Supply | 100-240V AC, 50/60 Hz |
| Supported Resolutions | Up to 4K@60Hz |
| Audio Formats Supported | Dolby Digital, DTS, PCM |
| Audio Support | Embedded Audio |
| Control Protocols | Crestron, TCP/IP |
| Control Interface | Ethernet |
Statements regarding FCC and Industry Canada compliance rules.
Lists key features and capabilities of the DM-MD6X4/DM-MD6X6.
Explains the switching matrix for HD sources.
Details the DM 8G+ technology for one-wire distribution.
Describes compliance with HDBaseT standards for interoperability.
Explains HDCP key management for fast signal switching.
Details technology for rapid signal switching.
Explains EDID management and discusses scaling capabilities.
Covers audio routing, Ethernet switch, and USB HID signal routing.
Covers quick setup using front panel or software.
Details video switcher, input/output types, and resolutions.
Covers audio formats, comms protocols, power requirements, and environmental limits.
Details enclosure, dimensions, weight, and available accessories.
Illustrates front/rear views and provides overall unit dimensions.
Details front and rear panel connectors, controls, and status indicators.
Lists wire colors for DM output connector pins.
Covers network wiring, Ethernet setup, and IP addressing modes.
Explains IP table configuration and setting the IP ID.
Includes ventilation, rack mounting, stacking, and hardware hookup.
Step-by-step guide to enter Installer mode for device configuration.
How to name and configure inputs/outputs and view EDID.
Configuring network parameters and control system connections.
Procedures to exit Installer mode.
Step-by-step guide to route input signals to outputs.
Procedure to disconnect routed signals.
Overview of programming tools, software requirements, and firmware upgrades.
Explains IP table setup, configuration, and DMTool functions.
Guide to diagnosing and resolving common operational problems.
Lists related documents and provides customer support contact information.
To Next Page
