The Crestron® DM-MD6X4 and DM-MD6X6 DigitalMedia™ Distribution
Centers direct multiple high-definition sources to up to four rooms
(DM-MD6X4) or up to six rooms (DM-MD6X6) as part of a complete
Crestron system.
In the Box
1 DM-MD6X4 or DM-MD6X6, DigitalMedia Distribution Center
Additional Items
2 Bracket, Rack Ear (2029724)
4 Foot, 0.5 in. x 0.5 in. x 0.23 in., Adhesive (2002389)
1 Cable, Power, 6 ft 7 in. (2m) (2001134)
Install the Device
The device can be mounted into a rack or placed on a flat surface.
Mount into a Rack
To install the included rack ears:
1. Use a #1 or #2 Phillips screwdriver to remove the three screws from
each side of the front of the device as shown in the following
illustration.
2. Use the screwdriver and the screws removed in step 1 to attach the
included rack ears to the device.
Place on a Flat Surface
Attach the included feet near the corners on the underside of the device
before placing the device onto a flat surface or stacking it with other
equipment.
1
DM-MD6X4/DM-MD6X6
QuickStart
DigitalMedia™ Distribution Centers
To Next Page
Need help?
General
