Need help?Do you have a question about the Crestron AMP-2210S and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Amplifier Class | Class D |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Power Output (8 Ohms) | 100W per channel |
| Power Output (4 Ohms) | 200 Watts |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Total Harmonic Distortion (THD) | < 0.1% |
| Input Sensitivity | 1 Volt |
| Inputs | 2 x RCA, 2 x XLR |
| Weight | 4.5 kg (10 lbs) |
Lists the key features and operational capabilities of the amplifiers.
Technical specifications for the AMP-2210S/3210S, including audio and power details.
Explains how to connect audio sources, both balanced and unbalanced.
Common issues, their potential causes, and recommended corrective actions.
To Next Page