Contents
Overview 5
Specifications 6
Dimension Drawings 9
Installation 10
Install the DIN-1TSTAT8 11
Mount the DIN-1TSTAT8 to the DIN rail 11
Remove the DIN-1TSTAT8 from the DINrail 11
Wire the DIN-1TSTAT8 12
Zone Valve and Main Valve connections (1-8, MAIN) 13
Temperature Sensor Connections (TEMP SENSE) 14
Cresnet Connections (NET) 14
Verify System Operation 15
Operation 16
Bootup 16
Main Valve Delay 16
1-8 Buttons and LEDs 16
MAIN Button and LED 16
Temperature Sensors 16
Failsafe Mode 17
Troubleshooting 18
Resources 19
Crestron Support and Training 19
Programmer and Developer Resources 19
Product Certificates 19
Product Manual — Doc. 9368A Contents • iii
To Next Page
Loading...
