Crestron DM-MD8X8 - Output, Network, and System Settings

DigitalMedia™ Switchers Crestron DM-MD8X8/16X16/32X32
Hardware Connections for the DM-MD16X16 Rear
LAN:
10/100/1000BASE-T
Ethernet to LAN
DM INPUT CARD SLOTS 9-16:
Install Cards to Receive Input
Signals from Audio, Video, and PC
Sources
POWER:
From Line Voltage
GROUND:
Tie All Source and
Device Grounds to
GROUND Terminal
DM INPUT CARD SLOTS 1-8:
Install Cards to Receive Input
Signals from Audio, Video, and PC
Sources
DM OUTPUTS (SLOT 1):
Factory-Installed Card to Transmit
DigitalMedia Signals to DigitalMedia Room
Controllers
DM OUTPUTS (SLOT 2):
Factory-Installed Card to Transmit
DigitalMedia Signals to DigitalMedia
Room Controllers
DMNET PORTS (SLOT 1):
Connect to DM Receivers and Select
Internal or External Power
DMNET PORTS (SLOT 2):
Connect to DM Receivers and Select
Internal or External Power
38 x
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755C