Crestron DM-MD8X8 - Operation Modes; Navigating Route, View, and Info Modes

Crestron DM-MD8X8/16X16/32X32 DigitalMedia™ Switchers
x Scenario 2: Control Center with Control System and DM switcher and
DM-RMC-100 Room Controller; Automatic IP Table Configuration
Control Center Containing Control System and DM Switcher Operating with
Classroom Containing Control System and DM-RMC-100 Room Controller
DM Switcher
DM-RMC-100
Ethernet
Ethernet
Ethernet DMNet
Classroom
Control Center
Control
System
Control
System
To configure a SIMPL Windows program for this layout, drop
DM-RMC-100-F devices onto the control system’s Ethernet slot. The IP
table of each DM-RMC-100-F will require manual configuration.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Example Program
Example programs for the DM-MD8X8, DM-MD16X16 and DM-MD32X32 are
available from the Crestron website (
www.crestron.com/exampleprograms).
Operations Guide – DOC. 6755C DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 x
65