Crestron DM-NVX-360 - Page 7

Observe the LED Indicators
Refer to the following table for information about the LED indicators on
the device.
LED
Indicator
Color Meaning
PWR Amber Power is being applied to the device. Thedevice
is booting.
Green Power is being applied to the device. Thedevice
is operational.
SETUP Red The SETUP button is pressed.
INPUT SEL,
HDMI
Green The HDMI input is selected.
Amber An HDMI signal is detected but the HDMI input
is not selected.
INPUT SEL,
NV
Green
The NV (network video) input is selected.
Amber
Network video is detected but the NV input is
not selected.
OL Green The device is online with a control system.
NV Green
(Transmitter mode only) The device is encoding
(transmitting) network video.
(Receiver mode only) The device is decoding
(receiving) network video.
TX Green The device is in transmitter (encoder) mode
RX Green The device is in receiver (decoder) mode.
LED Indicators (Continued)
LED Indicator Color Meaning
Ethernet 1 Green An Ethernet link is established.
Flashing
amber
Data activity is occurring on the Ethernet
link.
Ethernet 2 Green An Ethernet link is established.
Flashing
amber
Data activity is occurring on the Ethernet
link.
Ethernet 3 Green An Ethernet link is established.
Flashing
green
Data activity is occurring on the Ethernet
link.
Amber A 100BASE-TX link is established.
Ethernet 4
LINK
Green An Ethernet link is established.
Ethernet 4
ACT
Flashing
green
Data activity is occurring on the Ethernet
link.
HDMI
OUTPUT
Green A video signal is being transmitted to the
HDMI output.
HDMI INPUT Green A video signal is detected at the HDMI input.
7
DM-NVX-363 and DM-NVX-360
QuickStart
DM NVX® 4K60 4:4:4 Network AV Encoders/Decoders