Crestron HD-WP-4K-401-C User Manual

HD-WP-4K-401-C
4K Multi-Window Video Processor with
HDBaseT
®
and HDMI
®
Outputs
Supplemental Guide
Crestron Electronics, Inc.

Crestron HD-WP-4K-401-C Specifications

General

Category	Media Converter
Model	HD-WP-4K-401-C
Manufacturer	Crestron
Input	HDMI
Output	HDMI
Maximum Resolution	4K@60Hz
HDMI Version	2.0
HDCP Support	2.2
Audio Format	Dolby Digital, DTS, LPCM
Operating Temperature	0°C to 40°C
Control	IR, RS-232

Summary

Introduction

Using Out-of-the-Box Functionality

Describes the automatic display of connected sources without programming.

Using the Web Interface

Accessing the Web Interface

Lists operating systems and supported web browsers for accessing the interface.

Opening a Web Browser Directly

Provides steps to access the web interface via a direct browser connection.

Opening Web Browser via Crestron Toolbox

Details how to access the web interface using the Crestron Toolbox application.

Logging Into the HD-WP-4K-401-C

Explains entering username and password to access the device's web interface.

Navigating the Web Interface

Describes the web interface structure, navigation bar, and page access.

Viewing Status Information

How to view general, network, and control system connection status details.

Configuring Windowing Settings

How to configure video windowing layout, including automatic and manual modes.

Configuring On-Screen Display Settings

How to set up text or image overlays on the video output.

Configuring Text Overlay Settings

Steps to add, position, and format text overlays on the display.

Configuring Image Overlay Settings

Steps to upload, position, and format image overlays on the display.

Configuring Inputs on the Input Page

How to configure inputs, including EDID and HDCP, using the main input page.

Configuring Inputs on Input-Specific Pages

Details on configuring individual input settings like name, EDID, and HDCP.

Configuring Output Settings

Configuring Outputs on the Output Page

Steps to configure general output settings like resolution and underscan.

Configuring Outputs on Output-Specific Pages

How to configure individual HDMI and HDBT output settings.

Configuring HDMI or HDBT Output Settings

How to enable/disable outputs and handle HDCP mismatches.

Configuring Automatic Power Settings

How to configure automatic power-off and power-on behaviors based on input detection.

Configuring Network Settings

Configuring Device Settings

Configuring Control System Connection

How to establish and manage connection with a control system.

Enabling or Disabling the Front Panel

How to enable/disable the OLED display, front panel buttons, and LEDs.

Changing Username and Password

Steps to change user login credentials for device security.

Configuring RS232 Port Settings

How to configure serial port communication parameters like baud rate and data bits.

Updating Firmware

Steps for updating the device's firmware via USB or service port.

Restoring Factory Default Settings

How to reset the device to its original factory configuration and settings.

Rebooting the HD-WP-4K-401-C

Procedure to restart the device through the management interface.

Using the Front Panel OLED Display Menu

Overview of the front panel OLED display and its scrolling information.

Accessing and Navigating the OLED Display Menu

How to use OLED push buttons and navigation pad to access and navigate device menus.

Configuring via the Front Panel OLED Display Menu

Configuring Windowing Settings (OLED Menu)

How to configure video windowing settings via the OLED menu.

Configuring Video Window Layout (OLED Menu)

Steps to select and configure video window layouts using the OLED menu.

Configuring Window Titles (OLED Menu)

How to configure window titles and their positions using the OLED menu.

Configuring Input Settings (OLED Menu)

How to configure inputs, including Global EDID, via the OLED menu.

Configuring Individual Input Settings (OLED Menu)

Details on configuring individual input settings like name, EDID, and HDCP via OLED.

Configuring Output Settings (OLED Menu)

How to configure output settings like status and name via the OLED menu.

Configuring Network Settings (OLED Menu)

How to configure network settings like DHCP and DNS via the OLED menu.

Configuring Device Settings (OLED Menu)

How to configure device details, front panel, firmware, and restore via OLED menu.