Crestron HD-WP-4K-401-C - Configuring Window Titles (OLED Menu)

Supplemental Guide – DOC. 7901B HD-WP-4K-401-C: 4K Multi-Window Video Processor • 31
Window Submenu (Window 1 Shown)
< Window 1 >
INPUT 1
b. Select the desired video input for the window. By default, the inputs are
listed as
INPUT 1, INPUT 2, INPUT 3, and INPUT 4.
c. Repeat steps 3a and 3b for each window listed in the Layout submenu.
Configuring Window Titles
To configure window titles, do the following: In the Windowing submenu, select Window
Titles.
Windowing Submenu
< Windowing >
Window Titles
The Window Titles submenu opens.
Window Titles Submenu
< Window Titles >
Window Titles
Items on the Window Titles submenu are listed in the following table. Refer to the table for
configuration guidelines.
Window Titles Submenu Guidelines
SUBMENU
ITEM GUIDELINES
Window Titles
Controls whether the input name is to be displayed over the corresponding
window:
•
Enable:
(Default setting) Allows window titles, which display the input
name over the corresponding window
•
Disable:
Prevents the input name from being displayed over the
corresponding window
An asterisk precedes the current setting.
Titles Position
(Applicable only when
Window Titles
is enabled) Select one of the following
options to position window titles:
Upper Left
(default setting),
Center Left
,
Lower Left
,
Upper Right
,
Center Right
,
Lower Right
. An asterisk precedes
the current setting.