Crestron DM-RMC-SCALER-C User Manual

Crestron DM-RMC-SCALER-C DigitalMedia 8G+ Receiver
Operations & Installation Guide – DOC. 7231B DigitalMedia 8G+ Receiver: DM-RMC-SCALER-C
•
9
DM-RMC-SCALER-C Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
CBL Series Crestron Certified Interface Cables
CNSP-XX Custom Serial Interface Cable
DM-CBL-8G DigitalMedia 8G Cable
DM-8G-CONN-100 DigitalMedia 8G Cable Connectors
DM-8G-CONN-WG DigitalMedia 8G Cable Connector with
Wire Guide
DM-8G-CRIMP Crimping Tool for DM-8G-CONN
DM-8G-CRIMP-WG Crimping Tool for DM-8G-CONN-WG
IRP2 IR Emitter Probe
MP-WP Series Media Presentation Wall Plates
MPI-WP Series Media Presentation Wall Plates –
International Version
USB-EXT-DM-LOCAL USB Extender Module for Host
USB-EXT-DM-REMOTE USB Extender Module for Devices
1. Using the DMTool in Crestron Toolbox™, the scaler can be enabled/disabled.
2. Automatically passes 3D video if display device supports it (reverts to pass-through mode
without scaling). Provides automatic 3D-to-2D conversion (with scaling) if display device does not
support 3D.
3. Video wall processing requires a separate DM-RMC-SCALER-C for each individual display.
4. For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron
DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or third-party CAT5e (or
better) UTP or STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices.
Shielded cable and connectors are recommended to safeguard against unpredictable environmental
electrical noise which may impact performance at resolutions above 1080p. For complete system
design guidelines, refer to the Crestron DigitalMedia Design Guide (Doc. 4546). DM 8G+ is
compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.
All wire and cables sold separately.
5. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cables sold separately.
6. With or without reduced blanking.
7. With reduced blanking only.
8. Compatible with Crestron USB-EXT-DM-LOCAL and USB-EXT-DM-REMOTE USB Extenders,
sold separately.

Crestron DM-RMC-SCALER-C Specifications

General

Product color	Black
Heat dissipation	41 BTU/h
Housing material	Metal
Scaled resolutions	640 x 480, 800 x 600, 848 x 480, 1024 x 768, 1280 x 1024, 1280 x 720, 1280 x 768, 1280 x 800, 1360 x 768, 1366 x 768, 1400 x 1050, 1440 x 900, 1600 x 1200, 1600 x 900, 1680 x 1050, 1920 x 1080, 1920 x 1200
RJ-45 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC adapter frequency	50/60 Hz
AC adapter input current	0.75 A
AC adapter input voltage	100-240 V

Weight and Dimensions

Depth	37 mm
Width	194 mm
Weight	870 g