Crestron DM-RMC-SCALER-S/S2 DigitalMedia 8G Fiber Receiver
Operations & Installation Guide – DOC. 7324B DigitalMedia 8G Fiber Receiver: DM-RMC-SCALER-S/S2 21
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron Web site. To post a question or to view questions submitted
to Crestron’s True Blue Support, log in at www.crestron.com/onlinehelp. First-time
users must establish a user account to fully benefit from all available features.
Software Requirements for the PC
NOTE: The latest software can be downloaded from the Crestron Web site
(www.crestron.com/software).
Crestron provides an assortment of Windows
-based software tools to develop a
customized system. Use Crestron SIMPL Windows to create a program to control the
DM receiver.
Programming with SIMPL Windows
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”:
Configuration and Program.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
1. To incorporate the DM receiver into the system, drag the DM receiver from
the DigitalMedia | DM Receivers folder of the Device Library and drop it
into either of the following in System Views:
A compatible output card of a DM switcher
Directly to a card in the Ethernet slot of the control system
(used without a DM switcher)
Locating the DM-RMC-SCALER-S/DM-RMC-SCALER-S2 in the Device Library
To Next Page
Loading...
Need help?
General
