Need help?Do you have a question about the Crestron DigitalMedia Room Controller DM-RMC-100 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Type | DigitalMedia Room Controller |
| HDMI Output | 1 HDMI output |
| Ethernet | 10/100 Mbps; auto-switching |
| Control System | Crestron |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| IR/Serial | Yes |
| Relay | Yes |
| USB | Yes |
| DM 8G+ Input | 1 DM 8G+ input |
| Analog Audio Output | 1 analog stereo output |
| IR/Serial Port | 1 IR/Serial port |
| Relay Port | 1 relay port |
| USB Port | 1 USB port |
| Input Connectors | DM 8G+ |
| Output Connectors | HDMI, Analog Audio, IR/Serial, Relay |
| Audio Support | Stereo |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
Details the device's compliance with FCC rules and regulations.
Details the device's compliance with Canadian ICES-003 standards.
Lists key features and capabilities of the DM-RMC-100.
Lists optional accessories compatible with the DM-RMC-100.
Details the connectors, controls, and indicators on the DM-RMC-100.
Guidelines for wiring the DMNet and Ethernet networks.
How to set the IP ID for the DM-RMC-100.
Precautions and requirements for installing the DM-RMC-100.
Specifies software versions needed for PC-based programming.
Guide to using Crestron SystemBuilder for programming.
Guide to using SIMPL Windows for programming.
Details TCP/IP communication setup using the LAN port.
Provides a table of common problems, causes, and corrective actions.
Outlines the procedure for returning products for credit, exchange, or repair.
Specifies the terms and duration of the limited warranty.
To Next Page
